Search the Blog !

Tuesday, December 2, 2014T12/02/2014 01:00:00 PM

ATM 702X Action Chip Tablet Flashing Tutorial with Latest Flasher.

ATM 702X Action Chip Tablet Flashing Tutorial with Latest Flasher.

 ATM7021 , ATM7021A,ATM7029

Actions Product PAD Tool
 Flashing Tool for  Action CPU based ATM 702X Tablets.
Step by Step Tutorial . 
How to Flash Action Tablets (ATM7021 , ATM7021A , ATM7029) ?

ATM7021,ATM7021A,ATM7029 Tablet Flashing Tutorial


Install Setup.exe
ATM7021,ATM7021A,ATM7029 Tablet Flashing Tutorial


Now you need to put your tablet into boot mode
Boot mode for Action Tablet Pc (ATM7021 , ATM7021A , ATM7029).
for boot mode Action CPU Tablet turn off tablet . Hold  Volume UP(+) button and connect Action ATM702X tablet and insert cable .While holding  Volume Up button press power button simultaneously  4 to 5 times. Computer found new hardware and driver will be installed . To make sure either your android tablet is connected go to properties of my computer and find out in USB portion"Action USB 2.0" .
ATM7021,ATM7021A,ATM7029 Tablet Flashing Tutorial


 Open Action Pad Product Tool . Pad Product tool will automatically  open a dialogue box for the firmware file.  Select the appropriate firmware with extension .fw . for reference see image 1.4

ATM7021,ATM7021A,ATM7029 Tablet Flashing Tutorial
1.4 Action Tablet Flashing Tool

Action PAD Product Tool will load firmware and "Replace Firmware " dialog box will appear. Current firmware and New firmware detail will be shown . Click on Replace firmware
ATM7021,ATM7021A,ATM7029 Tablet Flashing Tutorial
1.5 Action Tablet Flashing Tool

You will notice a button in right corner of Action Pad Product Tool will be green. (Green button indicate,  that you are ready to flash Action Tablet.  You do not need to click on any other option like Advance Config or AUTOMATION. You can view detail of loaded ATM 702X Tablet firmware (as shown in image 2 and 2.1). On top left corner you will also see the USB Detection notification " 1 Usb Device Detected ".


ATM7021,ATM7021A,ATM7029 Tablet Flashing Tutorial
2. Action Tablet Flashing Tool

ACTION TABLET TUTORIAL
2.1 Action Tablet Flashing Tool
Click on DOWN button to start flashing. 
it will start with downloading VMLINUX .

ATM7021,ATM7021A,ATM7029 Tablet Flashing Tutorial
2.2 ATM7021,ATM7021A,ATM7029 Flashing Tool 

Writing MISC Partitions.

ACTION TABLET TUTORIAL
2.3 ATM7021,ATM7021A,ATM7029 Flashing Tool 

Then Writing System Partitions. 

ACTION TABLET TUTORIAL
2.4 ATM7021,ATM7021A,ATM7029 Flashing Tool 

Writing Data Partitions. 

ACTION TABLET TUTORIAL
2.5 ATM7021,ATM7021A,ATM7029  firmware loader 

Writing Data_BAK_ Partitions .

ACTION TABLET TUTORIAL
3. ATM7021,ATM7021A,ATM7029 Flashing Tool 

 Successful 100 %. 
ATM7021,ATM7021A,ATM7029 Tablet Flashing Tutorial
3.1 ATM7021,ATM7021A,ATM7029  firmware loader 

Congratulations : You have done Flashing Action ATIM 702X Tablet.  Successful notifications will also be display on down left corner. Accumulative 1, Successful 1. Failed 0.

ATM7021,ATM7021A,ATM7029 Tablet Flashing Tutorial
3.2 Action tablet firmware loader 

Things to Remember . 

Do not disconnect your tablet during flashing process. Charge your tablet more than 60% before flashing. Power failure during flashing may result dead tablet
Make sure your tablet is Action CPU based
Find out board id and download exact firmware.Choosing wrong firmware may result  soft brick or dead tablet.

Note :- The above mentioned method was tested and find 100% working with ATM7021A CPU based tablet. However I did not find any trouble or difficulty during the flashing process but I do not take any responsibility.

Acknowledgement :

All the logo's are property of their respective owners. Action Chip is property of Actions Semi Conductors . 


SHARE

Shami

Hi. I’m Designer of This blog. My Aim is to help people related Android Technology and teach them whatever I know , Knowledge always multiply when you share it with othes, and I also believe "Sharing is Caring".

    Blogger Comment
    Facebook Comment

24 comments:

  1. TW_J0711S_V51_20140516 my teblet have this firmware..is this same that you mention..if not where i get it

    ReplyDelete
    Replies
    1. Bonjour SHAMI ZAHEER
      Je cherche pout AIRIS Onepad 980
      ATM 7021A
      TW_J0910_4bit_V10_20140118
      Merci
      Dandiane

      Delete
  2. I finished with the process, everything seemed fine, the firmware was correct, the software worked well , but when you restart the tablet, not on!

    ReplyDelete
    Replies
    1. Did you charge the tablet before flashing ? did you read "" Do not disconnect your tablet during flashing process. Charge your tablet more than 60% before flashing. Power failure during flashing may result dead tablet. ""

      Delete
  3. I finished with the process, everything seemed fine, the firmware was correct, the software worked well , but when you restart the tablet, screen white why??? please help me

    ReplyDelete
    Replies
    1. firmware was not compatible with your device. Try another

      Delete
  4. Error process does not end brand write_recovery_partition I can not find solution

    ReplyDelete
  5. Hello,
    I desperately need firmware for my tablet.
    Could you help me please?



    CPU ATM7021A ZF10FAA C7C



    BOARD I.D. ZX-A10-V1.0-131102 4813



    P.N. KD101N7-40N8-A172014017C300001689

    The commercial name of the device is TREDI TPC1057

    ReplyDelete
  6. Hello my tablet no have buttom vol. only reset and power, can you help me

    ReplyDelete
  7. Hi I have a Tablet 7" ProntoTec ATM7021A M2101B_V1.1, can you help me with the firmware. Thanks

    ReplyDelete
  8. flash the tablet and my tablet dead now and also not connected with pc... ?
    how can i connect again with pc..

    ReplyDelete
    Replies
    1. you need to short the pins on main chip

      Delete
  9. please m2101b_v1.0_atm7021a marca: prontotec modelo: m2101

    ReplyDelete
  10. hey my tablet amt7021a tw j0711as v32 20150519 flashing sccss full but blank screen plz help bro argent

    ReplyDelete
  11. hi, i want firmware for atm tw_j0711at_v20 2015622 , any body help me

    ReplyDelete
  12. hello
    i want firmware ATM7021A TW_J0711S V70_20141212

    ReplyDelete
  13. hello
    I want firmware ATM7031B TW_J0780AT_V22_20151208

    ReplyDelete
    Replies
    1. Hola, solucionaste tu problema? A mi se me olviso el patron de bloqueo, pero el PC no me reconoce la tablet, mi version es V1.1 , he encontrado la V1.8 How did you connect to the PC?

      Delete
  14. when i flashed my tablet the tablet screen gone black .i can not do anything.please help me

    ReplyDelete
  15. Necesito firmware para tablet CPU- ATM7021A Board: ATM7021A_86V_V1.1 GSL 1680 RTL 8188ETV

    ReplyDelete
  16. tnks for all pro but i have error the progress is stop in adfu mode i have always a mistak with correct driver add it plz win7 atm7029 tab mpman mpqc783
    tnks a lot

    ReplyDelete

Advertisement

Follow by Email

Google+ Badge